News

• The Trend Of Four-Roll Plate Rolling Machine

  A folding machine is a special forging machinery that can bend metal plates into cones, spheres, cylinders or other shapes. This article describes the development trend of the four-roll rolling machine.

  News July 08, 2022
• How to improve the shearing effect of the shearing machine

  This article introduces how to improve the shearing effect of the shearing machine. The first method is to adjust the shearing angle of the shearing machine, and the second method is to adjust the blade gap to improve the cutting effect.

  News July 06, 2022
• Selection and replacement of shearing machine blades

  As a convenient production machine, the most important thing to remove the structure of the machine itself is the blade. This article describes how to select and replace the blades of a shearing machine.

  News July 04, 2022
• The function and adjustment method of the blade gap of the shearing machine

  The knife edge gap is the distance between the cutting points of the upper knife and the lower knife of the shearing machine. If the gap is too large or too small, it will affect the shearing of the steel plate. Therefore, it needs to be adjusted for different boards.

  News July 01, 2022
• Left and right error adjustment method of torsion shaft bending machine

  Long-term use of the bending machine will cause mechanical errors due to wear and other conditions, resulting in different angles on both sides of the workpiece when bending the workpiece. It is the fastest and most convenient to adjust the inclined iron between the upper knife and the quick clamp. This article will describe two other methods that can be adjusted.

  News June 29, 2022
• Why can't I set the Y value of my Press Brake

  Bending machines generally have abbreviations such as 2+1 3+1 4+1, such as 2+1, the first 2 represents the Y axis of the main function, and the X axis of the back gauge of the auxiliary function. The +1 axis is the mechanical compensation of the machine. 2+1 is generally the basic function. 3+1, 4+1, etc. are all perfected in the back gauge.

  News June 28, 2022
• Selecting die for Press Brake

  When using a bending machine, the mold is essential, and the accuracy of the mold determines the final accuracy of the product. The following is a brief introduction to what kind of mold the product needs.

  News June 23, 2022
• How to choose the Press Brake that suits you according to the product

  The most important thing about the feasibility of bending is to look at the combination of molds. And how to choose the tonnage of the bending machine.

  News June 21, 2022
• CNC Press Brake structure

  CNC bending machine is mainly composed of the following parts: bed part, slider part, Y-axis detection part, mold clamping part, back gauge part, compensation part, hydraulic system, console relay and other main parts.

  News June 17, 2022
• 4 Press Brake Bending Basics You Need to Know

  This article covers 4 basics of press brake bending, including material type, material thickness, tools, and crowning devices.

  News June 16, 2022