News

• How to choose the right gas to cut carbon steel

  With the continuous progress and breakthrough of high power laser cutting technology, nitrogen and air has become a strong auxiliary of carbon steel processing work. Flexible choice of nitrogen, oxygen, and air according to different application requirements can not only improve cutting efficiency, but also reduce end-processing costs.

  News March 11, 2022
• The trend of over 10,000 watt laser cutter development

  The fiber laser cutting machine which over 10,000 watt has been developed and put on the market. Over 10,000 watt laser cutting machine is the inevitable trend of the development of laser cutting industry.

  News February 25, 2022
• How to choose the right CNC laser cutting machine?

  How to choose a suitable CNC laser cutting machine? The point is, you need to know how much power needed for processing first of all. Each model machine has a relative cutting thickness and speed itself.

  News February 22, 2022
• Laser cutting machine: Manual focus vs Automatic focus

  A fiber laser cutting machine with automatic focusing function is better than a manual focusing one mostly. With the progress of science and technology, automatic focusing laser cutting machine will be more practical, the processing efficiency is more outstanding, and thus provide better help for users.

  News February 11, 2022
• Hydraulic shearing machine common failure and solution

  1. How to replace the pipe seals of hydraulic shearing machine？Firstly, put the upper tool of the hydraulic shearing machine to the bottom dead corner, then cut off the power of the machine tool, loosen the pipe of the leaking part to take out the damaged seal, and then apply a layer of butter in th

  News January 28, 2022
• Fiber Laser Machine: The Ulitimate Guide

  Fiber laser machine are widely used in industrial settings to perform cutting, marking, welding, cleaning, texturing, drilling, and more. It outputs a laser beam with high energy density, which is concentrated on the surface of the workpiece, so that the area irradiated by the ultra-fine focal spot on the workpiece instantly melts and vaporizes.

  News January 25, 2022
• Why do burrs occur when using laser cutter?

  Burrs are still occurred while the parameters are set up well during using the laser cutting machine. So what caused such a problem? Let's take a look at the causes.

  News January 20, 2022
• What are press brake axis

  When talking about press brake, we can always hear X,Y,R,C axis, whereas such made certain buyers confused. Different axis represents different role and direction of motion. Today we're going to talk about it in detail.

  News January 13, 2022
• How many axis do you need on a Press Brake?

  The number of axes your press brake​ needs depends on the parts you want to bend. As for a torsion bar press brake, it will have a minimum of 2 axes. There will be Y axis for the ram position and one X axis for the back gauge.

  News January 07, 2022
• How to choose correct bending V size?

  Top select thin plate processing molds, the formula of V=6T fits for plates below 3mm. For plates between 3 to 8mm, V=8T can be used for high requirement customers. For plates more than 8mm thickness, V=12T can be used if the customer does not require high accuracy and radian.

  News December 31, 2021