Company News

• How to choose C Type punch press

  The article introduces how to choose C type punch press.

  Company News September 21, 2022
• Shredding machine maintenance

  When the shredding runs at high load for a long time, there will be different degrees of failure. This article describes which parts of the shredder to check for failure in different situations, and how to maintain it.

  Company News August 31, 2022
• How to determine the depth of the plate grooving

  The grooving process is to make the material easy to bend forming and bending Angle R can be minimized, and then use bending machine or manual bending mold, in this way to complete processing and meet the appearance requirements of the product. So what should we pay attention to when grooving?

  Company News August 29, 2022
• The use of knife for grooving machine

  The kinds of CNC grooving machine knife are mainly divided into rhomboid apex angle groove knife, square groove knife, triangle groove knife, round groove knife and so on. The knives can be selected to groove materials of different shapes and angles.

  Company News August 26, 2022
• The difference between vertical and horizontal grooving

  The V-Grooving machine on the market is mainly divided into vertical and horizontal, so what is the difference between the two kinds?

  Company News August 25, 2022
• Shredder Application

  The role of a shredder is actually very simple: to process raw raw materials or scraps to make them smaller in size. A typical example is to shred plastic or rubber scraps and use them as raw materials to melt and granulate them to remake plastic bottles, tires or trash cans. The second is to process the wrongly processed scrap parts for remanufacturing or scrapping.

  Company News August 17, 2022
• The Role Of The V-Grooving Machine

  Due to the increasing pursuit of product aesthetics, the arc formed by conventional bending and bending can no longer meet the needs, and the public began to pursue the three-dimensional sense of edges and corners. Therefore, when bending, we prefer the arc of the bending Angle to be smaller. In order to meet this need, the process of grooving emerged.

  Company News August 15, 2022
• How to ensure cutting accuracy

  The most important precision control method is mechanical coordination. Then let the machine get the desired accuracy from the settings, focus the laser beam into a cone, and try to keep the minimum focus on the cutting blade. Finally, different cutting materials will also affect the accuracy of the laser cutting machine.

  Company News August 01, 2022
• Selection of Bending Oil Cylinder and Servo Motor

  The power of the pipe bending machine is mainly driven by the oil cylinder and the servo motor. This article mainly introduces the selection of the bending oil cylinder and the servo motor.

  Company News July 15, 2022
• Choosing Shearing machine： Guillotine shearing or swing beam shearing?

  The most significant difference between guillotine shears and pendulum beam shears: the accuracy of guillotine shears is greater than that of pendulum beam shears, and secondly, the two have different uses.

  Company News July 13, 2022