Article List

• The difference between different bending systems

  With the popularization of hydraulic press brakes, the operating system of the machine has become more and more suitable for the needs of use, from the ordinary loop control to the current system diversified control, and the technology is gradually mature. But how to choose among so many systems? This article will show you the differences between the different systems.

  News August 05, 2022
• Laser cutting speed setting

  Laser cutting speed directly affects the incision width and incision surface roughness. Different material thickness, different cutting gas pressure, cutting speed has an optimal value, this optimal value is about 80% of the maximum cutting speed.

  News August 03, 2022
• How to ensure cutting accuracy

  The most important precision control method is mechanical coordination. Then let the machine get the desired accuracy from the settings, focus the laser beam into a cone, and try to keep the minimum focus on the cutting blade. Finally, different cutting materials will also affect the accuracy of the laser cutting machine.

  News August 01, 2022
• Laser cutting machine loading and unloading

  The loading and unloading of the laser cutting machine is mostly done manually, and some heavier materials are completed by walking, and the loading and unloading speed is slow and unsafe. So this link can be replaced by a machine or a simple machine.

  News July 29, 2022
• Laser cutting requirements for sheet metal

  Lasers can cut sheet metal well, but not all sheets can be cut. The flatness of the steel plate, the internal stress of the plate, and the carbon content of the plate will affect the cutting effect.

  News July 27, 2022
• How to choose a laser cutting machine

  This article describes all the data descriptions for choosing a laser cutting machine. If the output is large and you want to increase the output, it is recommended to choose an exchange table. If you have requirements for the pollution of your own factory area, it is recommended to choose a closed machine.

  News July 25, 2022
• What should I do if there is a Interference during the production of pipe products?

  There are various problems with elbows due to shape issues, the most important of which is the collision with the machine. This paper introduces the solutions to two disturbances in the production process of pipe products.

  News July 22, 2022
• Selecting molds layers of pipe bender

  Pipe benders generally determine the number of layers according to the number of molds. There are three main types of molds: ordinary type, push-bend type, and molding type.

  News July 20, 2022
• How does the pipe bender front support (pipe clamp) work？

  The part of pipe fittings to be bent is conveyed by the feeding mechanism to the bending mold arranged at the front end of the bending machine for bending processing. Because the middle part of the pipe fittings is easy to bend downward due to the influence of the dead weight, so in the process of forward feeding, the pipe fittings are easy to drift and shake, and it is difficult to reach the bending mold accurately.

  News July 18, 2022
• Selection of Bending Oil Cylinder and Servo Motor

  The power of the pipe bending machine is mainly driven by the oil cylinder and the servo motor. This article mainly introduces the selection of the bending oil cylinder and the servo motor.

  News July 15, 2022