Bending machine pre-sale service

Bending machine pre-sale service

Customers want to buy bending machine, the biggest problem is that they do not know how to choose, the general know their material and size and thickness of the material can be calculated according to the fixed formula. Although the bending model number is calculated, but the press brake bending machine mold can not be seen, you need to consider a lot of factors.

Considering this problem, our company has a professional technical team to solve these problems for customers in the first time. You only need to provide your product drawings, we will draw them and bend them for simulation. We use our powerful die database to simulate the bending of the workpiece and observe whether there is interference. Figure 1 shows a preliminary bending scheme of the workpiece.

Figure 1 Preliminary Design Proposal

According to this drawing, we modified the mold to avoid the two interference points in the last bending step, so that the knife will be thinner. The next step is to analyze the strength of the die. After analysis, the tool can not be used for the thicker plate, and the tool head will break. Our technical team will optimize the second one, as shown in Figure 2.

Figure 2 Optimized Design Scheme

After optimization, the head part of the tool becomes thicker to meet the thickness of the plate and the versatility of the mold for customers will also increase.

It can also be seen from Figure 1 and Figure 2 that we will rationalize the bending sequence of the customer's workpiece to reduce interference while designing the mold. Make complex bends with minimal tooling. Through such pre-sale service, customers can ensure that after receiving the press brake machine, they only need to connect the power supply and fill the hydraulic oil to start the machine according to the process.